solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet features: ? extremely low forw ard voltage drop ? low reverse leakage ? hermetically sealed package ? guard ring for overvoltage protection ? eutectic die attach ? 175 c operating junction temperature ? tx, txv, or space level screening available ssr1008/5 ssr1009/5 ssr1010/5 10 amp 80 100 volts schottky rectifier to-5 maximum ratings rating symbol value unit peak repetitive reverse voltage and dc blocking voltage ssr1008/5 ssr1009/5 ssr1010/5 v rrm v rwm v r 80 90 100 volts average rectified output current 1 / (resistive load, 60hz, sine wave, ta=25 c) i o 10 amps peak surge current 1 / (8.3 ms pulse, half sine wave, superimposed on i o , allow junction to reach equilibrium between pulses, ta=25 c) i fsm 150 amps operating and storage temperature t op & t stg -65 to +175 c maximum thermal resistance 1 / junction to case r jc 7.0 c/w notes: 1 / for optimal performance, connect leads 1 & 2 together (anode). note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: sh0022c doc
notes: 2 / v f as measured between pins 1 and 2 in common, within .100? from the case, and pin 3 directly at the case. case outline- to-5 pin 1- anode pin 2- anode pin 3- cathode case- cathode solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ssr1008/5 ssr1009/5 ssr1010/5 electrical characteristics characteristics symbol maximum unit instantaneous forward voltage drop 2 / (i f = 1 adc, t a = 25 c, 300 - 500s pulse) (i f = 5 adc, t a = 25 c, 300 - 500s pulse) (i f = 10 adc, t a = 25 c, 300 - 500s pulse) v f1 v f2 v f3 0.56 0.73 0.85 vdc instantaneous forward voltage drop (i f = 5 adc, t a = -55 c, 300 - 500s pulse) v f4 0.82 vdc reverse leakage current (rated v r , t a = 25 c, 300s pulse minimum) i r1 100 a reverse leakage current (rated v r , t a = 100 c, 300s pulse minimum) i r2 5 ma junction capacitance (v r = 10 vdc, t a = 25 c, f = 1 mhz) c j 400 pf note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: sh0022c doc
|
